RETROPLANE.net Index du Forum
FAQ - Charte - Rechercher - Fichiers - Membres - S'enregistrer - Annuaire - Vérifier ses messages privés - Connexion

1: 3.25 scale MG19a Steinadler
Aller à la page
1, 2, 3, 4, 5 Suivante

 
Poster un nouveau sujet   Répondre au sujet    RETROPLANE.net Index du Forum -> Constructions Détaillées en Photo
Voir le sujet précédent :: Voir le sujet suivant  
Auteur Message
cw
Accro Posteur
Accro Posteur


Inscrit le: 06 Juil 2008
uk.gif

Localisation: Blandford, Dorset, Southern England
Âge: 76 Sagittaire

MessagePosté le: 09/11/2008 21:59    Sujet du message: 1: 3.25 scale MG19a Steinadler Répondre en citant

Time for a new project...!

This is a proper glider with bent wings, the MG19a... Very Happy

I must first of all than Vincent for letting me use his CAD drawings for reference: this has made life a lot easier. The construction will be extensively modified of course: 1: to suit my style of construction and 2: because the model will be nearly twice the size. I started cutting wood yesterday morning and,[img]

as you can see, progress has been good... Laughing

1st, a dry fit to see how it will look





Now the fuselage side is pinned to the board






Cutting the slot for the joining reinforcer between the front and rear ply sheeting




This is the joining piece, left over from the planking...




The planking contiues...




cw
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Envoyer un e-mail
Orionis
Incurable Posteur
Incurable Posteur


Inscrit le: 31 Aoû 2006
france.gif

Localisation: Drôme
Âge: 57 Bélier

MessagePosté le: 10/11/2008 08:18    Sujet du message: Répondre en citant

This is another high-speed building thread! Cool


Fabrice
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Visiter le site web de l'utilisateur
de Schaetzen Harold
Maniaco Posteur
Maniaco Posteur


Inscrit le: 06 Avr 2006
belgium.gif

Localisation: Schilde
Âge: 78 Verseau

MessagePosté le: 10/11/2008 09:51    Sujet du message: Répondre en citant

Dear Chris,

Please reduce your building speed.
I need first to upgrade the speed of my PC!

Harold
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Envoyer un e-mail
Paul ELLIS
Fidèle Posteur
Fidèle Posteur


Inscrit le: 24 Oct 2007
france.gif

Localisation: Haute Vienne, Limousin
Âge: 77 Verseau

MessagePosté le: 10/11/2008 14:03    Sujet du message: Répondre en citant

I should have invested in masking tape and balsa when I had the chance. Wink


Un anglais en France
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Visiter le site web de l'utilisateur
loopingfred
Incurable Posteur
Incurable Posteur


Inscrit le: 24 Jan 2006
ireland.gif

Localisation: Dublin - Ireland
Âge: 48 Gémeau

MessagePosté le: 10/11/2008 16:16    Sujet du message: Répondre en citant

Laughing


"Je ponce, donc j'essuie" - Rachel
MORE BEERS!!!!
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Yahoo Messenger
cw
Accro Posteur
Accro Posteur


Inscrit le: 06 Juil 2008
uk.gif

Localisation: Blandford, Dorset, Southern England
Âge: 76 Sagittaire

MessagePosté le: 11/11/2008 23:51    Sujet du message: Répondre en citant

It is always good to remove the fuselage half-shell from the board...



Even better to make up the other side...





cw
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Envoyer un e-mail
Paul ELLIS
Fidèle Posteur
Fidèle Posteur


Inscrit le: 24 Oct 2007
france.gif

Localisation: Haute Vienne, Limousin
Âge: 77 Verseau

MessagePosté le: 12/11/2008 10:32    Sujet du message: Répondre en citant

Chris

Will you be flying it at the week-end? Wink

Vas-tu le voler ce week-end? Wink

Paul



Un anglais en France
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Visiter le site web de l'utilisateur
cw
Accro Posteur
Accro Posteur


Inscrit le: 06 Juil 2008
uk.gif

Localisation: Blandford, Dorset, Southern England
Âge: 76 Sagittaire

MessagePosté le: 12/11/2008 23:03    Sujet du message: Répondre en citant

Paul, je ne c'est pas...peut etre il pleut... Laughing

(That's it...my only schoolboy French!)



cw
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Envoyer un e-mail
Paul ELLIS
Fidèle Posteur
Fidèle Posteur


Inscrit le: 24 Oct 2007
france.gif

Localisation: Haute Vienne, Limousin
Âge: 77 Verseau

MessagePosté le: 13/11/2008 09:47    Sujet du message: Répondre en citant

Félicitations Chris, tu parles bien français. [good]

(Trois fautes) MDR



Un anglais en France
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Visiter le site web de l'utilisateur
plu ronan
Incurable Posteur
Incurable Posteur


Inscrit le: 10 Jan 2007
france.gif


MessagePosté le: 15/11/2008 14:01    Sujet du message: Répondre en citant

tu deviens un vrai francais paul MDR
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé MSN Messenger
cw
Accro Posteur
Accro Posteur


Inscrit le: 06 Juil 2008
uk.gif

Localisation: Blandford, Dorset, Southern England
Âge: 76 Sagittaire

MessagePosté le: 16/11/2008 16:50    Sujet du message: Répondre en citant

The planking continues...



Now the hard bit is over...!



Steaming the 1.5mm plywood for the top of the rear fuselage...



Starting to look like a proper fuselage now...





cw
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Envoyer un e-mail
loopingfred
Incurable Posteur
Incurable Posteur


Inscrit le: 24 Jan 2006
ireland.gif

Localisation: Dublin - Ireland
Âge: 48 Gémeau

MessagePosté le: 16/11/2008 17:49    Sujet du message: Répondre en citant

Hi Chris,

Quick question for you... You are using a kettle to steam the plywood.. Is it efficient with that lenght and thickness ? [humm] Very good idea! One to keep for the next project ! (and handy for tea in the garage Wink )

(Question pour Chris. Tu utilises une bouilloire pour former les planches a la vapeur. Est ce que c'est efficace ?)

Fred



"Je ponce, donc j'essuie" - Rachel
MORE BEERS!!!!
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Yahoo Messenger
cw
Accro Posteur
Accro Posteur


Inscrit le: 06 Juil 2008
uk.gif

Localisation: Blandford, Dorset, Southern England
Âge: 76 Sagittaire

MessagePosté le: 16/11/2008 17:56    Sujet du message: Répondre en citant

Fred, tea is no problem...my workshop is next to the kitchen Very Happy

Steaming plywood is not very efficient, I get perhaps 25% of the shape I need, but it's enough to make trimming and glueing the ply much easier. The 6mm x 6mm Ramin longerons in the fuselage steam much better: you can get nearly all of the required shape...


La vapeur de la bouilloire avec le ctp n'est pas tres efficace, j'obtiens peut etre 25% de la forme que je veux lui faire, mais c'est assez pour le collage/découpe. les baguettes de ramin en 6x6mm se forment beaucoup plus facilement a la vapeur de la bouilloire, et il est possible de leur faire prendre toutes les formes que l'on veut...



cw
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Envoyer un e-mail
loopingfred
Incurable Posteur
Incurable Posteur


Inscrit le: 24 Jan 2006
ireland.gif

Localisation: Dublin - Ireland
Âge: 48 Gémeau

MessagePosté le: 16/11/2008 18:25    Sujet du message: Répondre en citant

Very Happy Yeah, kitchen close to the garage too Very Happy The builders must have been modelers ! Wink

Thanks for the tip Chris ! [amen]

To shape the ramin, how do you proceed ? You have a few seconds to work it out or you have a bit of time ? [humm]



"Je ponce, donc j'essuie" - Rachel
MORE BEERS!!!!
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Yahoo Messenger
cw
Accro Posteur
Accro Posteur


Inscrit le: 06 Juil 2008
uk.gif

Localisation: Blandford, Dorset, Southern England
Âge: 76 Sagittaire

MessagePosté le: 16/11/2008 19:23    Sujet du message: Répondre en citant

Here's a photo I took earlier... Very Happy

This was taken after the steaming process. Ramin is very bendy when hot and wet, so yoiu have plenty of time to get in, do the business. and then let it cool down. Gloves are a very good idea Laughing Laughing





cw
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Envoyer un e-mail
cw
Accro Posteur
Accro Posteur


Inscrit le: 06 Juil 2008
uk.gif

Localisation: Blandford, Dorset, Southern England
Âge: 76 Sagittaire

MessagePosté le: 18/11/2008 21:51    Sujet du message: Répondre en citant

Whilst the planking of the fuselage is being completed, it's time to make a start on the stab...




Drawing centre lines on everything helps to see if it is all straight



Masking tape and pins are essential for the sheeting process (1.5mm balsa)




cw
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Envoyer un e-mail
Laurent Beldame
Incurable Posteur
Incurable Posteur


Inscrit le: 17 Fév 2006
switzerland.gif

Localisation: - Genève - au pied du Salève -

MessagePosté le: 18/11/2008 22:37    Sujet du message: Répondre en citant

Hello Chris

An other perfect building made with frenetic rythm..The tradidional teapot is not forgotten, ramin or not ramin Wink Wink

L
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé
cw
Accro Posteur
Accro Posteur


Inscrit le: 06 Juil 2008
uk.gif

Localisation: Blandford, Dorset, Southern England
Âge: 76 Sagittaire

MessagePosté le: 20/11/2008 23:09    Sujet du message: Répondre en citant

Laurent, have you had any success with your flycam...?

Tonight is a big night...the the temporary formers have been removed before adding the GRP

Using the power file to clean up the inside of the fuselage...



Ready now for the fibreglass




cw
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Envoyer un e-mail
Paul ELLIS
Fidèle Posteur
Fidèle Posteur


Inscrit le: 24 Oct 2007
france.gif

Localisation: Haute Vienne, Limousin
Âge: 77 Verseau

MessagePosté le: 20/11/2008 23:34    Sujet du message: Répondre en citant

Salut Chris

I would like a Power File like that

Je voudrais un Power File comme ça

In the UK on offer at Axminster Tools for £39.95... (€47)

En Angleterre un offre spéciale de Axminster Tools c'est €47

In France €99.99 at Mr Bricolage!!!!! (£84.69)

En France €99.99 à Mr. Bricolage!!!!

Unfortunately the postage from the UK takes it up to £55

Malheureusement avec le courier de UK c'est €65

Is there anyone here who has seen a Power File cheaper in France?

Est-ce qu'il y a quelq'un ici qui a vu un Power File moin cher en France?



Un anglais en France
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Visiter le site web de l'utilisateur
cw
Accro Posteur
Accro Posteur


Inscrit le: 06 Juil 2008
uk.gif

Localisation: Blandford, Dorset, Southern England
Âge: 76 Sagittaire

MessagePosté le: 22/11/2008 12:05    Sujet du message: Répondre en citant

Paul, I've just noticed that Machine Mart, where I bought the powerfile, have an export service...

http://www.machinemart.co.uk

+44 115 956 5555



cw
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Envoyer un e-mail
Paul ELLIS
Fidèle Posteur
Fidèle Posteur


Inscrit le: 24 Oct 2007
france.gif

Localisation: Haute Vienne, Limousin
Âge: 77 Verseau

MessagePosté le: 22/11/2008 12:37    Sujet du message: Répondre en citant

Thanks Chris, I'll check them out.

I was just surprised that they were so much more expensive in France (not usually the case)

Paul

P.S. I checked with Machine Mart and they're asking £52.86 (€62.47) plus postage

Looks like it's going to be Axminster tools

http://www.axminster.co.uk/product.asp?pf_id=720128&filter_cat=&am.....le=1&jump=0



Un anglais en France
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Visiter le site web de l'utilisateur
cw
Accro Posteur
Accro Posteur


Inscrit le: 06 Juil 2008
uk.gif

Localisation: Blandford, Dorset, Southern England
Âge: 76 Sagittaire

MessagePosté le: 22/11/2008 18:23    Sujet du message: Répondre en citant

Before we can complete the rear of the fuselage the stab must be built.
Now it's time for the elevator...




The elevator is made over-size to be sanded back to shape later




The hinges must be supported in the stab with wooden dowel. The dowel is wrapped with masking tape first to preven splitting whilst being drilled...



Now the dowels are glued into the stab...



Once hinged up, the elevator can be sanded back flush with the stab...


Final shaping of the tips is left until the end...




Et voila, ready for the finishing touches...





cw
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Envoyer un e-mail
Paul ELLIS
Fidèle Posteur
Fidèle Posteur


Inscrit le: 24 Oct 2007
france.gif

Localisation: Haute Vienne, Limousin
Âge: 77 Verseau

MessagePosté le: 22/11/2008 18:38    Sujet du message: Répondre en citant

Excellent progress as usual Chris [clap]

How deep have you made the elevator shroud?

I think I made mine too deep on the Minimoa (about 12mm) hence the problems I had trying to recess the elevator deep enough. Embarassed

Paul



Un anglais en France
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Visiter le site web de l'utilisateur
cw
Accro Posteur
Accro Posteur


Inscrit le: 06 Juil 2008
uk.gif

Localisation: Blandford, Dorset, Southern England
Âge: 76 Sagittaire

MessagePosté le: 23/11/2008 22:35    Sujet du message: Répondre en citant

A difficult thing to measure afterwards Paul, but I guess around 10mm

Meanwhile, the rain it rains, the wind it blows, the cold goes up your trouser legs...perfect building weather!

Time to beef up the cockpit aperture...




Now to apply the polyester filler...



As usual the nose block is made up from filler, but with some lead built in to get the ballast as far forward as possible



Now the skid has been attached...



And the cockpit aperture is now very strong...!





cw
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Envoyer un e-mail
de Schaetzen Harold
Maniaco Posteur
Maniaco Posteur


Inscrit le: 06 Avr 2006
belgium.gif

Localisation: Schilde
Âge: 78 Verseau

MessagePosté le: 24/11/2008 09:49    Sujet du message: Répondre en citant

Dear Chris,

I notice good building activiy this WE.
Now it is time to call the house keeper and specially to activate your vacuum cleaner.
Or you need to put a new breathing mask.
Best regards.

Harold
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Envoyer un e-mail
cw
Accro Posteur
Accro Posteur


Inscrit le: 06 Juil 2008
uk.gif

Localisation: Blandford, Dorset, Southern England
Âge: 76 Sagittaire

MessagePosté le: 25/11/2008 00:29    Sujet du message: Répondre en citant

Harold, if I use our new vacuum cleaner to remove the dust, my wife will have something to say [oumff]


cw
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Envoyer un e-mail
cw
Accro Posteur
Accro Posteur


Inscrit le: 06 Juil 2008
uk.gif

Localisation: Blandford, Dorset, Southern England
Âge: 76 Sagittaire

MessagePosté le: 28/11/2008 22:22    Sujet du message: Répondre en citant

It is the weekend again, hooray...

The tailplane will be set up to rig and connect up very quickly and easily.
The 2 square brass tubes will be set in the fuselage, but first we must experiment to find the optimum set up...




Now to check it out in the fuselage...





cw
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Envoyer un e-mail
cw
Accro Posteur
Accro Posteur


Inscrit le: 06 Juil 2008
uk.gif

Localisation: Blandford, Dorset, Southern England
Âge: 76 Sagittaire

MessagePosté le: 29/11/2008 23:45    Sujet du message: Répondre en citant

The elevator pushrod is made up from 12 x 6mm Spruce, reinforced with 6 x 10mm balsa




Two servos operate the pushrod with an aluminium connecting plate. There is a slot over one servo arm so that if one servo dies, the other can give 50% of the movement...




Another view of the pushrod in the fuselage





cw
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Envoyer un e-mail
cw
Accro Posteur
Accro Posteur


Inscrit le: 06 Juil 2008
uk.gif

Localisation: Blandford, Dorset, Southern England
Âge: 76 Sagittaire

MessagePosté le: 30/11/2008 18:37    Sujet du message: Répondre en citant

Time now to continue sheeting the fuselage: thin card is used for a template. Pressing down with a thumb causes the edges to show up on the card to give the correct shape...


Now the shape can be transferred to the ply (CTP?)


And now the ply on to the fuselage...




cw
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Envoyer un e-mail
cw
Accro Posteur
Accro Posteur


Inscrit le: 06 Juil 2008
uk.gif

Localisation: Blandford, Dorset, Southern England
Âge: 76 Sagittaire

MessagePosté le: 05/12/2008 23:17    Sujet du message: Répondre en citant

Work continues at the rear...meanwhile, the fuselage is now fully sheeted in CTP







cw
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Envoyer un e-mail
Montrer les messages depuis:   
Poster un nouveau sujet   Répondre au sujet    RETROPLANE.net Index du Forum -> Constructions Détaillées en Photo Toutes les heures sont au format GMT + 1 Heure
Aller à la page
1, 2, 3, 4, 5 Suivante
Page 1 sur 5

 
Sauter vers:  
Vous ne pouvez pas poster de nouveaux sujets dans ce forum
Vous ne pouvez pas répondre aux sujets dans ce forum
Vous ne pouvez pas éditer vos messages dans ce forum
Vous ne pouvez pas supprimer vos messages dans ce forum
Vous ne pouvez pas voter dans les sondages de ce forum
Vous ne pouvez pas joindre des fichiers
Vous pouvez télécharger des fichiers

Zone de Téléchargement du Forum et Site Retroplane


Images aléatoires album Retroplane, clic pour Agrandir

Forum en Flux RSS