CIRUS HS 62

ultralajt · Fidèle Posteur Inscrit le: 01 Nov 2007 Âge: 64

These days I start to do a research about vintage Yugoslav bi-place school sailplane CIRUS HS 62, as I feel it would be a very good candidate for an large scale RC model, due its proportions and unique appearance.

The main problem at most of old Yugoslav sailplanes is lack of technical documentation. There are some pretty weel done drawings in Martin Simmons books, but there are not all interesting sailplanes included.

For a CIRUS HS 62 (and later model 64), only some 3 view drawings are widely available for public. As I see, these drawings are not well acurate drawn that could serve as a firm base for making the scale rc model plans&drawings.

So, my research lead me trough a very comherensive site of Aeroclub Sarajevo, where an excelent description of complete design story of CIRUS HS 62 and 63, are made by its designer, Mr. Neno Hrisafovic.

I was able to contact Mr. Hrisafovic regarding Cirus saiplane and he kindly give me his hand in order to help me with research of this cute sailplane details. In lack of workshop technical documentation, he send me some hand made drawings of internal structures, and give me some explanations. At this moment only minor details are waiting to be made and or corrected, but there are pretty enough informations now, for making of plans and drawings of a scale RC glider.

I am aiming towards 1:4 scale, which gives a wingspan of 4,25m.

Well, enough talking, let see the drawings I made:

If you want to see larger resolution of this drawing, and some other photos of this sailplane, visit my web Blog here (scroll down to Cirus):
http://ultralajt.webs.com/apps/blog/show/5309098-triglav-and-cirus-hs-62-vintage-yugoslav-sailplanes

So much for now.

When plans will be ready, probably the assembly of a model will starts....

Till then...

Regards!

Mitja

Anonyme · Serial Posteur Inscrit le: 26 Jan 2006

A nice and interesting subject Very Happy

I do like the Triglav too...

ultralajt · Fidèle Posteur Inscrit le: 01 Nov 2007 Âge: 64

Some of the photos of a Cirus as found on AK Sarajevo website.

CIRUS HS 62 prototype during a test flight.

Very eye apealing canopy.

Front cockpit.

Designer looking at a test version of the wing rib design. Note small scale model of Cirus, on the table!

ultralajt · Fidèle Posteur Inscrit le: 01 Nov 2007 Âge: 64

And another view on my drawings:

caralp_laurent · Posté le: 23/11/2010 17:47 Sujet du message:

Hi Mitja,
beautiful glider, great shape Wink

Lolo

ultralajt · Fidèle Posteur Inscrit le: 01 Nov 2007 Âge: 64

ultralajt · Fidèle Posteur Inscrit le: 01 Nov 2007 Âge: 64

Some progress:

Mitja

VincentB · Posté le: 28/11/2010 18:34 Sujet du message:

Hi Mitja, you want to build the fuselage in welded steel tubes?

ultralajt · Fidèle Posteur Inscrit le: 01 Nov 2007 Âge: 64

ultralajt · Fidèle Posteur Inscrit le: 01 Nov 2007 Âge: 64

Unfortunately I choose fast way to get model flying, so I did not show building thread here. Embarassed

Fuselage is made using "lost foam" composite, and wing is sandwiched.
javascript:emoticon(' Rolling Eyes

')
Sorry guys... Sad

You can see model flying at my youtube channel:

http://www.youtube.com/watch?v=z5pG3Cuie0M&list=PL4ED493AF45863E87&feature=plcp

Regards!

Mitja

Anonyme · Serial Posteur Inscrit le: 26 Jan 2006

hello Mitja, congratulations for this awesome model.
(Thanks a lot for your kind comments on RC/groups)
Marc

ultralajt · Fidèle Posteur Inscrit le: 01 Nov 2007 Âge: 64

Thanks Mark. Nice build threads deserve kind comments! Very Happy

Bytheway, I want to share here a little trick I use in making scale rudder pedal for the Cirus HS-62!

I was having troubles finding some useful material to represent rubber padding on the rudder pedal (see photo below).

Suddenly I came acros idea, that save me from headache! [tips]

I take Super Sculpey* (polimer clay for making dolls and sculptures) squeeze it into a thin sheet (pancake) and then use threaded rod ( M8 ) and roll it over the Sculpey surface. Threaded rod left nice grooves into the Sculpey.
Then I put Sculpey into a kitchen owen for 30min at 130°C. Sculpy then became hard. It can be cut with scisors and sand with sandpaper. It behave then like an ordinary plastic. I glue a part of that material onto the pedal and paint with silver paint.

I am sure, that any complicated part of the cockpit interior, like various buttons, knobs, handles and paddings, can be done using this material.

See my finished rudder pedal:

* Super Sculpey
It is modeling clay, also useful for making pilot heads, hands, shoes....

Link: http://www.sculpey.com/products/clays/super-sculpey

Regards!

Mitja

Anonyme · Serial Posteur Inscrit le: 26 Jan 2006

Very realistic, good idea ! Very Happy

VincentB · Posté le: 03/09/2012 20:21 Sujet du message:

Nice detail [clap]

I like too super sculpey, it's a good idea to use this product for that

ultralajt · Fidèle Posteur Inscrit le: 01 Nov 2007 Âge: 64

One more.. Very Happy

I made these "buttons" (shallow sperical bolt heads) on the pedal surface such way, that I simple make drops of white carpenter glue (water resistant) on the surface using toothpick. When glue dries it became almost firm as an plastic, but it shrink a little, so that shrinkage must be taken in concern (or not if you are tolerant as me).

Mitja