Fafnir 4m - Cem

jean claude Crétal · Posté le: 26/10/2009 19:43 Sujet du message:

Bonne construction Cem [clap]

It's very interesting your release system [good]

czirh · Posté le: 29/10/2009 11:18 Sujet du message:

What is the simplest method of this cutting process? [humm]

Thanks..

VincentB · Posté le: 29/10/2009 11:48 Sujet du message:

Hi Cem

You can cut with a small blade of electric saw in a X-Acto or a diamond disk

But me, I prefere to cover the fuselage without the canopy, and build and adjust the canopy in a second time...

czirh · Posté le: 29/10/2009 16:40 Sujet du message:

czirh · Posté le: 29/10/2009 19:17 Sujet du message:

Joiner tube..

czirh · Posté le: 30/10/2009 19:19 Sujet du message:

wing&fuselage connection

Lothar Mentz · Accro Posteur Inscrit le: 18 Oct 2006

Hi Cem,

it's a beautifull glider and a great job You are doing.

[amen]

Thank You for this detailed build-log. [clap]

Regards

Lothar

czirh · Posté le: 31/10/2009 16:49 Sujet du message:

czirh · Posté le: 31/10/2009 16:54 Sujet du message:

Today I made a simple stand for Fafnir. This is very important.

VincentB · Posté le: 31/10/2009 18:28 Sujet du message:

With that, it is more easy to work on the fuselage, we should make everytime a stand in first.

tuzkanh · Posté le: 31/10/2009 21:36 Sujet du message:

Cem abi çok iyi gidiyor kolay gelsin

jorge antonio · Stagiaire Posteur Inscrit le: 11 Sep 2009 Âge: 54

Hi Cem,
Beautiful bird, congratulations for the construction.

Jorge [clap]

czirh · Posté le: 01/11/2009 20:05 Sujet du message:

Elevator servo: Hextronik HX12K
Type: Digital
Gearing: Metal
Weight: 55g
Size: 40.7 x 19.7 x 42.9mm
speed (4.8v): 0.17sec/60degrees
speed (6.0v): 0.13sec/60degrees
stall torque(4.8v): 13kg/cm
stall torque(6.0v): 15kg/cm
Temperature Range: -30 to +60 Degree C
Dead Band Width: 4usec

czirh · Posté le: 05/11/2009 22:36 Sujet du message:

Good evening,
Fafnir procekt will delay. My right leg broke from two points. Operation tomarrow morning. [argh]

jean claude Crétal · Posté le: 05/11/2009 22:50 Sujet du message:

Aïe, it's bad news, I hope that your operation will be good
Amicalement,

erwan · Psycho Posteur Inscrit le: 17 Aoû 2006

Ooops ! i hope you a good operation!

czirh · Posté le: 07/11/2009 09:32 Sujet du message:

Christian · Posté le: 20/11/2009 21:49 Sujet du message:

Christian

de Schaetzen Harold · Posté le: 21/11/2009 11:37 Sujet du message:

I hope you are recovering well.
Did it happen during a flying cession? You didn’t break also a sailplane hopefully! [argh]

Harold

czirh · Posté le: 21/11/2009 18:17 Sujet du message:

Thank you all for good wishes. Very Happy

At home resting and trying to get used to crutches.

I'll probably stay a couple months away from my model. [argh]

Christian · Posté le: 21/11/2009 20:33 Sujet du message:

cw · Posté le: 22/11/2009 00:10 Sujet du message:

Sorry to hear of your predicament Cem, I hope you will recover soon...

AKGUN · Posté le: 14/12/2009 19:49 Sujet du message:

bonjour Cem,c'est un bon travail.j'espere que tu te rétabliera vite et que tu terminera bientôt.
merhaba Cem abi.bittiginde cok guzel bir model olucak kesin.insallah cabukcak iyilesip modelini bir an once bitirirsin.

czirh · Posté le: 14/12/2009 22:15 Sujet du message:

czirh · Posté le: 13/02/2010 09:48 Sujet du message:

After 3.5 months, I started working with my Fafnir again. I also organized a retro scale sailplane meeting ( July 17-18 ) among friends, a first in Turkey Very Happy

Greetings to all ... Cem

Christian · Posté le: 13/02/2010 12:48 Sujet du message:

Bonne nouvelle Very Happy

Christian

czirh · Posté le: 14/02/2010 17:26 Sujet du message:

czirh · Posté le: 14/02/2010 17:28 Sujet du message:

Today..

Jean-Paul · Posté le: 14/02/2010 20:07 Sujet du message:

Bon courage !! ' Very Happy

'

czirh · Posté le: 19/02/2010 18:30 Sujet du message:

Wing spars.