RETROPLANE.net Index du Forum
FAQ - Charte - Rechercher - Fichiers - Membres - S'enregistrer - Annuaire - Vérifier ses messages privés - Connexion

In 24 days from idea to finition

 
Poster un nouveau sujet   Répondre au sujet    RETROPLANE.net Index du Forum -> Technique
Voir le sujet précédent :: Voir le sujet suivant  
Auteur Message
ultralajt
Fidèle Posteur
Fidèle Posteur


Inscrit le: 01 Nov 2007
slovenia.gif


Âge: 64 Sagittaire

MessagePosté le: 09/01/2009 13:39    Sujet du message: In 24 days from idea to finition Répondre en citant

I made a little helper for me, that will hopefully make better parts for my future aeroplanes, that me with bare hands.

The working area of the machine is 38 x 65 x 7,5 cm.

I set myself a goal, to build a machine from aluminum, but as cheap as possible. I made it for less as 500€ (without software)

Here is a video of machine cutting a sample balsa rib.
It is still not a proper tool, but shortly I expect to recieve some proper milling tools that I ordered.

VIDEO: http://www.youtube.com/watch?v=yGu465NSD8I&

You can read a story about building this machine from beginning to today in my blog:
http://ultralajt.webs.com/apps/blog/

I intend to publish the plans for the machine in future.


























With best regards!

mitja



Never try, never fail....


Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Visiter le site web de l'utilisateur
loopingfred
Incurable Posteur
Incurable Posteur


Inscrit le: 24 Jan 2006
ireland.gif

Localisation: Dublin - Ireland
Âge: 48 Gémeau

MessagePosté le: 09/01/2009 20:38    Sujet du message: Répondre en citant

Looking good Mitja !
Very clean build ! [good]

So, what is your next glider project ? Very Happy



"Je ponce, donc j'essuie" - Rachel
MORE BEERS!!!!
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Yahoo Messenger
ultralajt
Fidèle Posteur
Fidèle Posteur


Inscrit le: 01 Nov 2007
slovenia.gif


Âge: 64 Sagittaire

MessagePosté le: 10/01/2009 12:50    Sujet du message: Répondre en citant

« loopingfred » a écrit:
Looking good Mitja !
Very clean build ! [good]

So, what is your next glider project ? Very Happy

Thanks!

It will be Guppy MK2,
and I am looking forward to build vintage RC sailplane Alpenflieger.

Mitja



Never try, never fail....
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Visiter le site web de l'utilisateur
Lothar Mentz
Accro Posteur
Accro Posteur


Inscrit le: 18 Oct 2006
europe.gif


MessagePosté le: 10/01/2009 15:30    Sujet du message: Répondre en citant

Hey Mitja,

congratulations, You've done a great job.

[amen] [amen] [amen]

I am surprised and impressed by the easy solutions You found. Cool
I wished I had seen Your maschine two years ago. I would have saved a lot of money.... Wink

By the way, if You are able to make the engeneering for this machine, it should be an easy job for You to build a vintage glider. [good]

Regards

Lothar



http://www.segelbootrefit.de/wordpress/
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé
ultralajt
Fidèle Posteur
Fidèle Posteur


Inscrit le: 01 Nov 2007
slovenia.gif


Âge: 64 Sagittaire

MessagePosté le: 11/01/2009 08:55    Sujet du message: Répondre en citant

Thanks Lothar!

I was just wanted to build a simple machine and cheap too.
So I decided to use commercial aluminum square tubes 30x30x2mm, and some angles 30x30x3. Jou know, my friend allso build himself a CNC machine, but he use a proffessional aluminum tubes with those "T" shaped groves.....and he pay ten times more for them a s was my aluminum costs. O.K. he can probably mill metalls, but I am aiming to balsa and white poplar ply and maybe some PCB material.

You wouldnt believe, how many components I have got from old stuff I didnt throw away, but stack them in my workshop.

When some of my computer accessories die, I dismantle it, and keep components, that can be reused in something else. Some smooth and strong steel rodst from printers, can serve as wing joiners in larger gliders. Often is not a bad idea to got some broken stuff from friends allso.

From two broken printers Epson Stylus 1500 (A2 format) I use "Carriage Return" steppers and use them for X and Y axis, From an old A3 matrix Epson LQ ?? I take a similar motor for the Z axis.

As a source of multi wires electrical cables for end switches and allso for stepper motors, I use old PC mouse cables. (I never throw away any dead mice)

My dear Granpa (Good bless him) use to say: "Dont fhrow away a dead mouse! If you cant find its use in seven years, you can still throw it to jour cat!"

Y and Z axes railings are steel rods from previous mentioned printers.
I even use some connenctors taken from those printer PCB`s.

So, often it pays out if an old aparature is not just thrown away, but somehow recycle as I did it.

Even a cooling fan for the electronic is taken from an old PC power supply.

So thats way (as already said in pthe first post), my whole machine minus software costs me less than 500€.
I spend about 90 hours designing and assembling this machine.

The stepper controller I use is H1 , click HERE.

Think I can say: "Mission acomplished!"

I intend to publish plans tor this machine in near future on my website.

Regards!

Mitja



Never try, never fail....
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Visiter le site web de l'utilisateur
ultralajt
Fidèle Posteur
Fidèle Posteur


Inscrit le: 01 Nov 2007
slovenia.gif


Âge: 64 Sagittaire

MessagePosté le: 16/05/2015 19:07    Sujet du message: Répondre en citant

Well, I just build another CNC machine. This time is a little bigger. The working area is 142x50cm.

I would like to add some photos, of this new machine and some model parts I made with, but frankly thesedays the image size of 600x600 pixels at 100 K is a little outdated...

So, see machine on my blog.

A wing I made recently:







Mitja



Never try, never fail....
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Visiter le site web de l'utilisateur
Anonyme
Serial Posteur
Serial Posteur


Inscrit le: 26 Jan 2006
blank.gif


MessagePosté le: 16/05/2015 22:11    Sujet du message: Répondre en citant

Nice work Mitja, i had a look to your new milling machine [clap] [clap]
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé
ultralajt
Fidèle Posteur
Fidèle Posteur


Inscrit le: 01 Nov 2007
slovenia.gif


Âge: 64 Sagittaire

MessagePosté le: 17/05/2015 07:59    Sujet du message: Répondre en citant

« Hecquetmarc » a écrit:
Nice work Mitja, i had a look to your new milling machine [clap] [clap]


In comparision with my previous machine, this one can be pushed to the limits of the feed speed:

https://www.youtube.com/watch?v=uxeoUKlCARc

Now, cutting of plywood parts is easy and fast.



Never try, never fail....
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Visiter le site web de l'utilisateur
Anonyme
Serial Posteur
Serial Posteur


Inscrit le: 26 Jan 2006
blank.gif


MessagePosté le: 17/05/2015 08:30    Sujet du message: Répondre en citant

yes Speedy Mitja !
So we have a new address for shortkit production !! Laughing
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé
ultralajt
Fidèle Posteur
Fidèle Posteur


Inscrit le: 01 Nov 2007
slovenia.gif


Âge: 64 Sagittaire

MessagePosté le: 17/05/2015 08:34    Sujet du message: Répondre en citant

« Hecquetmarc » a écrit:
yes Speedy Mitja !
So we have a new address for shortkit production !! Laughing

It is possible.... [humm]



Never try, never fail....
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Visiter le site web de l'utilisateur
Anonyme
Serial Posteur
Serial Posteur


Inscrit le: 26 Jan 2006
blank.gif


MessagePosté le: 17/05/2015 09:05    Sujet du message: Répondre en citant

Never try, never fail... Laughing
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé
VincentB
Serial Posteur
Serial Posteur


Inscrit le: 23 Jan 2006
world.gif

Localisation: En la playa, bajo el sol
Âge: 60 Scorpion

MessagePosté le: 17/05/2015 09:35    Sujet du message: Répondre en citant

Heuu, t'as pas une super bonne CNC Marc [fiufiu]


Retroplane et modélisme en pause, vanlife à haute dose.
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Visiter le site web de l'utilisateur
Anonyme
Serial Posteur
Serial Posteur


Inscrit le: 26 Jan 2006
blank.gif


MessagePosté le: 18/05/2015 07:13    Sujet du message: Répondre en citant

Je ne parlais pas pour moi , j'ai déjà mes entreprises...Et puis je pense prendre une année sabbatique..
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé
de plancke
Incurable Posteur
Incurable Posteur


Inscrit le: 18 Fév 2009
france.gif

Localisation: martigues
Âge: 48 Capricorne

MessagePosté le: 18/05/2015 11:49    Sujet du message: Répondre en citant

« Hecquetmarc » a écrit:
Je ne parlais pas pour moi , j'ai déjà mes entreprises...Et puis je pense prendre une année sabbatique..

Tu compte faire un formation [aspi] MDR
Tom Zzz



A ses débuts le grand chéne n'était qu'un gland !
On earth since 1976
le biplan Platounoff Faucon est réservé pour moi
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé
ultralajt
Fidèle Posteur
Fidèle Posteur


Inscrit le: 01 Nov 2007
slovenia.gif


Âge: 64 Sagittaire

MessagePosté le: 18/05/2015 12:17    Sujet du message: Répondre en citant

[humm] [humm]
Why so much MDR MDR MDR MDR MDR





[humm]





Laughing





Laughing MDR





[bave]





[amen]




Cool Wink



Never try, never fail....
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Visiter le site web de l'utilisateur
Anonyme
Serial Posteur
Serial Posteur


Inscrit le: 26 Jan 2006
blank.gif


MessagePosté le: 18/05/2015 12:41    Sujet du message: Répondre en citant

[clap] [clap] [clap] Nice work, I do like the motorbike ! Wink
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé
Montrer les messages depuis:   
Poster un nouveau sujet   Répondre au sujet    RETROPLANE.net Index du Forum -> Technique Toutes les heures sont au format GMT + 1 Heure
Page 1 sur 1

 
Sauter vers:  
Vous ne pouvez pas poster de nouveaux sujets dans ce forum
Vous ne pouvez pas répondre aux sujets dans ce forum
Vous ne pouvez pas éditer vos messages dans ce forum
Vous ne pouvez pas supprimer vos messages dans ce forum
Vous ne pouvez pas voter dans les sondages de ce forum
Vous ne pouvez pas joindre des fichiers
Vous pouvez télécharger des fichiers

Zone de Téléchargement du Forum et Site Retroplane


Images aléatoires album Retroplane, clic pour Agrandir

Forum en Flux RSS